A mobile phone forum. Mobile-Forum

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Mobile-Forum forum » General mobile phone forums » GSM
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

How to send and receive SMS via AT-Command with nokia E63 ?



 
 
Thread Tools Display Modes
  #11  
Old November 17th 15, 04:27 AM
dongtrien dongtrien is offline
Member
 
First recorded activity by MobileForum: Jun 2015
Posts: 34
Default

Quote:
Originally Posted by John Henderson[_2_] View Post
dongtrien wrote:

recievedData = ExecCommand(port, "at+stgr=6,1,1", 300, "Failed to SIM Toolkit Give Response.");


the variable recievedData is not get +STIN:9 and output: No success message was received.


In what units is the timeout paramater of 300?

Are you giving the device enough time to respond?

John
you're right, not enough time to run, according to your time for this case how much ? and the calculation of time so that the most appropriate ?
  #12  
Old November 17th 15, 08:42 AM posted to alt.cellular.gsm
John Henderson[_2_]
external usenet poster
 
Posts: 57
Default How to send and receive SMS via AT-Command with nokia E63 ?

dongtrien wrote:

you're right, not enough time to run, according to your time for

this
case how much ? and the calculation of time so that the most

appropriate

You'll need to experiment. Perhaps time it when you run it through
HyperTerminal. Run it a few times, and double the longest time.

That's what I'd do, and think about decreasing or increasing the
time later with more experience.

John
  #13  
Old November 18th 15, 05:39 AM
dongtrien dongtrien is offline
Member
 
First recorded activity by MobileForum: Jun 2015
Posts: 34
Default

Quote:
Originally Posted by John Henderson[_2_] View Post
dongtrien wrote:

you're right, not enough time to run, according to your time for

this
case how much ? and the calculation of time so that the most

appropriate

You'll need to experiment. Perhaps time it when you run it through
HyperTerminal. Run it a few times, and double the longest time.

That's what I'd do, and think about decreasing or increasing the
time later with more experience.

John

I think to have one certain way for rational calculation, if farming experience unreasonable because I think when I programmed the computer to run more, which means that it runs on all computers with the lowest configuration or maximum


now I have a problem statement at the end:
While running in HyperTerminal
Code:
...
at+stgi=1
+STGI: 0," xyz...", 1

OK

at+stgr=1

OK

+STIN: 9

at+stgi=9

+STGI: ""

OK

when I debug in languge C#: losing stream +STIN: 9
[code]
...
at+stgi=1
+STGI: 0," xyz...", 1

OK

at+stgr=1

OK

// This place is lost: +STIN: 9

at+stgi=9

+STGI: ""

OK
[/ CODE]


Press F5 in languge C# runtime monitoring variables through window: Show Output
[code]
...
at+stgi=1
+STGI: 0," xyz...", 1

OK

at+stgr=1

OK

// This place is lost: +STIN: 9

at+stgi=9

return buffer: at+stgi=9 // This place must be returned buffer: +STGI: ""
return buffer: ERROR // This place must be returned buffer: OK
[/ CODE]

I changed the time many ways and yet not be. what do you know this error is the error ?

Last edited by dongtrien : November 18th 15 at 09:53 AM.
  #14  
Old November 18th 15, 07:48 AM posted to alt.cellular.gsm
John Henderson[_2_]
external usenet poster
 
Posts: 57
Default How to send and receive SMS via AT-Command with nokia E63 ?

dongtrien wrote:

I think to have one certain way for rational calculation, if farming
experience unreasonable because I think when I programmed the computer
to run more, which means that it runs on all computers with the lowest
configuration or maximum


If you're concerned about waiting too long for a response, then you could
pass another parameter along with the timeout time.

Pass a string argument containing some text which lets the reading routine
return earlier than the timeout time permits (return instead when the string
is found).

For many AT commands, this could be the string "\r\nOK\r\n".

In the special case we're considering, look for the string "+STIN:" and
return when it's found. Then you can make the timeout value large, without
ever having to wait for it to expire.

John
  #15  
Old November 20th 15, 05:50 AM
dongtrien dongtrien is offline
Member
 
First recorded activity by MobileForum: Jun 2015
Posts: 34
Default

thank you for pointing help, I had a problem anymore, after registering successfully sim, group of AT command to get the information of sim and the serial number has been registered successfully obtain such information chain posted successful sign ? eg:

'128 12/11/11,15:19:16+28 You signed up for the subscription number 019861xxxx success. Trading code 0123xxxxx
  #16  
Old November 20th 15, 08:25 AM posted to alt.cellular.gsm
John Henderson[_2_]
external usenet poster
 
Posts: 57
Default How to send and receive SMS via AT-Command with nokia E63 ?

dongtrien wrote:

thank you for pointing help, I had a problem anymore, after registering
successfully sim, group of AT command to get the information of sim and
the serial number has been registered successfully obtain such
information chain posted successful sign ? eg:

'128 12/11/11,15:19:16+28 You signed up for the subscription

number
019861xxxx success. Trading code 0123xxxxx


I'm sorry, but I do not understand what it is you are saying.

If it is important, or you have further questions, please try again.

John
  #17  
Old November 21st 15, 03:40 AM
dongtrien dongtrien is offline
Member
 
First recorded activity by MobileForum: Jun 2015
Posts: 34
Default

Quote:
Originally Posted by John Henderson[_2_] View Post
dongtrien wrote:

thank you for pointing help, I had a problem anymore, after registering
successfully sim, group of AT command to get the information of sim and
the serial number has been registered successfully obtain such
information chain posted successful sign ? eg:

'128 12/11/11,15:19:16+28 You signed up for the subscription

number
019861xxxx success. Trading code 0123xxxxx


I'm sorry, but I do not understand what it is you are saying.

If it is important, or you have further questions, please try again.

John
my english is not very good, assuming you have 2 SIM: SIM1 and SIM2, you use SIM1 to view information such as the date of registration of SIM2 through at command are not ? if the syntax like? do you understand ?
  #18  
Old November 21st 15, 11:17 PM posted to alt.cellular.gsm
John Henderson[_2_]
external usenet poster
 
Posts: 57
Default How to send and receive SMS via AT-Command with nokia E63 ?

dongtrien wrote:

my english is not very good,


That's OK.

assuming you have 2 SIM: SIM1 and SIM2, you use SIM1 to view
information such as the date of registration of SIM2 through
at command are not ? if the syntax like? do you understand ?


I see that the E63 is a dual-SIM phone (it takes two SIMs).

I do not have an E63, and I have not used any dual-SIM device. I haven't
found any "AT Command Reference" which talks about Nokia dual-SIM
capability, so I don't think I can be of much help.

John


  #19  
Old November 24th 15, 07:34 AM
dongtrien dongtrien is offline
Member
 
First recorded activity by MobileForum: Jun 2015
Posts: 34
Default

Quote:
Originally Posted by John Henderson[_2_] View Post
dongtrien wrote:

my english is not very good,


That's OK.

assuming you have 2 SIM: SIM1 and SIM2, you use SIM1 to view
information such as the date of registration of SIM2 through
at command are not ? if the syntax like? do you understand ?


I see that the E63 is a dual-SIM phone (it takes two SIMs).

I do not have an E63, and I have not used any dual-SIM device. I haven't
found any "AT Command Reference" which talks about Nokia dual-SIM
capability, so I don't think I can be of much help.

John
I do not have an E63 a dual-SIM phone, you do not understand me. I want to ask the phone number you are using you can see the date of registration of the telephone number you are every day through the AT command ?
  #20  
Old November 24th 15, 02:58 PM posted to alt.cellular.gsm
John Henderson[_2_]
external usenet poster
 
Posts: 57
Default How to send and receive SMS via AT-Command with nokia E63 ?

dongtrien wrote:

I do not have an E63 a dual-SIM phone, you do not understand me. I want
to ask the phone number you are using you can see the date of
registration of the telephone number you are every day through the AT
command ?


The phone number might not be stored on the SIM at all. It isn't used by
the phone for any purpose. Instead, the phone uses the IMSI to identify
the
SIM.

If the phone number for a SIM is stored on the SIM., it will be stored as
the first number in the "Own Numbers" phone book.

Read the IMSI with the command:

AT+CIMI

Read the first entry in the "Own Numbers" phonebook (if it's there) with:

AT+CNUM

If you need to write the SIM's phone number to the SIM, first select the
"Own Numbers" phonebook with:

AT+CPBS="ON"

Then write the number as the first entry. If that number is "+61412345678"
(international format), the command is:

AT+CPBW=1,"+61412345678",145,"Own Nbr"

If the number is "0412345678" (national or "local" format), the command is:

AT+CPBW=1,"0412345678",129,"Own Nbr"

Usually, you would store the SIM's own number in international format, so
145 for type-of-number.

John
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
(old) Nokia 22 (gsm gateway, adapter) - how to send/receive sms from PC [email protected] Nokia 0 March 27th 10 06:59 PM
Nokia 3650 Acting up badly. Cant send/receive SMS, Reboots, memory full errors [email protected] Nokia 0 January 24th 05 05:02 PM
Send/Receive MMS w/Nokia 7250i Kingy75 Nokia 1 April 24th 04 07:42 PM
Help receive/send mms with nokia 3595 steve Voicestream GSM 4 October 19th 03 11:35 PM
How to send/receive a gif/midi with a nokia 3595 steve Nokia 0 October 19th 03 02:59 AM


All times are GMT +1. The time now is 06:34 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 Mobile-Forum.
The comments are property of their posters.