|If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.|
||Thread Tools||Display Modes|
need driver for data cable i90
if it's a serial cable you just plug it in and everything should work
without any drivers. If it's USB you'll need to do this:
Installing USB drivers and getting your USB cable to work.
** Your USB cable should NOT be plugged in yet. Plugging in your USB cable
prior to installing the drivers could result in a non-functioning cable.
Follow these instructions and everything should work fine.
Step 1: Download the USBinstallation.exe from
drivers will work for Windows XP, Windows 2000, and Windows 98se ONLY.
Step 2: Double click on the USBinstallation.exe file and follow the
Step 3: When prompted by the installation application, power on your phone
and connect it to the USB cable. Then connect the USB cable to your
Step 4: Once you have completed step 3, the installation application should
begin installing the driver files, if it does not continue automatically,
hit the "ok" button. Follow any instructions it gives. When it completes
the installation process, you will be able to use your USB cable. Enjoy!
** If you get an error when trying to use your USB cable, such as No USB
driver installed and you have already performed the above steps, you
probably plugged your USB cable in sometime BEFORE you followed the above
steps! To fix the problem, goto settings - control panel - modems and
highlight and remove IDEN USB Modem (if it is there). Then goto setting -
control panel - system and navigate to your device manager window (it's
located in different places depending on your OS). Under USB controllers
(at or near the bottom of the list) make sure there are NO USB controllers
there that are unknown or unidentified. If there are, remove them
(highlight, then right click, then uninstall). Restart your computer and
follow steps 1 through 4 above. If your cable still doesn't work, then you
need to get a serial cable cause your USB one isn't going to work!
"GEORGE ATHENS" wrote in message
i need a driver for my data cable i90 phone. i don't know if i need
certain software to run a data cable
[posted via phonescoop.com - free web access to the alt.cellular groups]
|Thread||Thread Starter||Forum||Replies||Last Post|
|Multi-SIM cards in one phone solution (Super SIM 16 in 1)||man||Motorola||0||March 20th 05 09:42 PM|
|Motorola V525 - USB Data cable - Driver required !!!||Tony Stock||Motorola||1||July 18th 04 07:30 PM|
|USB Cable Driver needed.||Invisible||Motorola||4||May 31st 04 07:51 AM|
|V300 - USB Data Cable - Driver||John Macko||Motorola||2||February 2nd 04 06:35 AM|
|Driver for USB data cable for Motorola v60g?||MS||Motorola||2||August 6th 03 05:50 PM|